Data Sources
Primary principle
The most important data on KiloNest is yours: the unit rate from your bill, the wattage on your appliance's rating plate, your meter readings. Our example values exist only to make the tools usable before you replace them.
What our typical figures are based on
- Appliance wattages. Typical ranges reflect the rating plates and manufacturer specifications of common models sold in the US, UK, EU and Australia (for example, mini-split air conditioners around 1,000–1,500 W for 12,000–18,000 BTU classes).
- Conversion factors. Standard definitions: 1 kWh = 1,000 W sustained for one hour; single-phase current A = W ÷ V. The AC BTU-to-watts rule of thumb uses a typical EER of about 3.4 (W/W).
- Peak sun hours. Broad regional annual averages consistent with national meteorological irradiance data (for example, roughly 2.5–3.5 h/day for the UK and 5–6.5 for the southern US). These are orientation figures; site-specific assessments use detailed local data.
- Example electricity rates. Round-number examples in the range of typical residential unit rates in each covered country at the time of writing. They are deliberately labelled “example rate” everywhere they appear and are not sourced from, or endorsed by, any supplier or regulator.
What we do not use
We do not scrape live tariff databases, present affiliate marketing figures as data, or publish statistics we cannot trace to a definition, a rating plate or a stated assumption.